SpeedyBee FS225 V2 Frame

SpeedyBee FPV
13 Jul 202105:01

TLDRIn this video, we explore the SpeedyBee FS225 V2 frame, a 5-inch FPV freestyle drone with a versatile top-mount battery layout and the ability to accommodate both 19mm and 20mm cameras. The frame's rigidity and 123-gram weight make it a balanced choice for pilots. It features interchangeable arms with self-locking nuts, a full-piece bottom plate, and various mounting options for different flight controller sizes. The inclusion of a 3D-printed part for the XC60 and antenna mounts adds to its appeal. The frame is priced at $60, and while the top plate could be thicker, the overall design promises durability and ease of maintenance.

Takeaways

  • 🚁 The SpeedyBee FS225 V2 Frame is a new 5-inch FPV freestyle drone frame with a top mount battery layout, but also supports bottom mount.
  • πŸ”¨ The frame is sponsored by PCBWay, recommended for project assembly and is suitable for both hobbyists and professionals.
  • πŸ“ Unique camera mounting allows for both 19mm and 20mm cameras by flipping the mount brackets.
  • πŸ“š The frame is rigid, weighing 123 grams, which is within the common range for such frames.
  • πŸ”© Arms are interchangeable, featuring self-locking nuts for easy replacement after crashes.
  • πŸ”© The bottom plate is a single piece, with multiple mounting solutions including 20x20, 30x30 configurations.
  • πŸ› οΈ The frame is compatible with DJI air units and requires some 3D printed parts for complete setup.
  • πŸ”© A 3D printed part is included to prevent propellers from chopping off the XC60 connector.
  • πŸ“‘ Four antenna mounts are provided, but it's recommended to shorten them to prevent breakage.
  • πŸ”‹ A high-quality fat battery strap is included with the frame.
  • πŸ“ The top plate is 2mm thick, while the arms are 5mm, providing good structural integrity but with a preference for thicker plates for added strength.

Q & A

  • What is the brand of the frame discussed in the video?

    -The brand of the frame discussed in the video is SpeedyBee.

  • What is the relationship between SpeedyBee and run cam?

    -SpeedyBee is essentially run by the same people who run run cam.

  • Who is the sponsor of the video?

    -The sponsor of the video is pcbway, a service recommended for project assembly.

  • What type of frame is the SpeedyBee FS225 V2?

    -The SpeedyBee FS225 V2 is a 5-inch FPV freestyle frame with a top mount battery layout.

  • Can the frame support both 19mm and 20mm cameras?

    -Yes, the frame can support both 19mm and 20mm cameras by flipping the camera mounting plates.

  • What is the weight of the SpeedyBee FS225 V2 frame?

    -The overall weight of the SpeedyBee FS225 V2 frame is 123 grams.

  • Are the arms of the frame interchangeable?

    -Yes, the arms of the frame are interchangeable, allowing for easy replacement in case of a crash.

  • What is special about the bottom plate of the frame?

    -The bottom plate is a full piece and has slits that can be used for 20 by 20 mounting, allowing for adjustable spacing.

  • Does the frame support DJI compatible units?

    -The frame can run DJI compatible units, specifically the air unit, but not the caddix vista, and may require some 3D printed parts.

  • What is included with the frame to prevent the propeller from chopping off the xc60?

    -A 3D printed part is included to fit onto the standoff, preventing the propeller from coming into contact with the xc60.

  • What is the thickness of the top plate and arms of the frame?

    -The top plate is 2 millimeters thick, while the arms are 5 millimeters thick.

Outlines

00:00

πŸŽ₯ Introduction to Speedy B's New FPV Frame

The video begins with an introduction to a new 5-inch FPV freestyle frame from Speedy B, a brand known for its high-quality products. The frame features a top mount battery layout with the option for bottom mount as well. It's designed to accommodate both 19mm and 20mm cameras, thanks to a unique flippable mounting system that adjusts the camera size to fit. The video is sponsored by PCBWay, a service recommended for project assembly, and viewers are encouraged to check the links in the description for more information.

Mindmap

Keywords

SpeedyBee FS225 V2 Frame

The SpeedyBee FS225 V2 Frame is the main subject of the video, a type of drone frame designed for FPV (First Person View) freestyle flying. It is a physical structure that holds together all the components of a drone, such as the motors, battery, and camera. In the video, it is highlighted as a new product from SpeedyBee, a company known for its association with RunCam, a popular brand for drone cameras.

FPV Freestyle

FPV Freestyle refers to a category of drone flying where pilots control the drone using a live video feed, typically wearing goggles or glasses that provide a first-person perspective. This style of flying is known for its agility and the ability to perform complex aerial maneuvers. The SpeedyBee FS225 V2 Frame is designed to accommodate this style of flying, with features that support high-performance aerial acrobatics.

Top mount battery layout

A top mount battery layout is a configuration where the battery of the drone is positioned on top of the frame. This design can help lower the center of gravity, potentially improving stability and flight performance. The video mentions that the SpeedyBee FS225 V2 Frame has a top mount battery layout but also suggests that bottom mounting is possible, offering flexibility in design.

Interchangeable arms

Interchangeable arms on a drone frame refer to the ability to replace individual arms without needing to replace the entire frame. This is an important feature for durability and maintenance, as it allows for easy repairs after crashes. The video script mentions that the SpeedyBee FS225 V2 Frame has interchangeable arms, which is a plus for users who may need to replace parts frequently.

Self-locking nuts

Self-locking nuts are a type of fastener that resists loosening under vibration, which is a common issue in drones due to the spinning motors. In the context of the video, self-locking nuts are highlighted as a beneficial feature of the SpeedyBee FS225 V2 Frame, as they help maintain the integrity of the drone's assembly, especially important for a drone that costs around $60.

20x20, 30x30 mounting solutions

These terms refer to the dimensions of the mounting patterns on the drone frame, which dictate the size and arrangement of components that can be attached to it. The video mentions that the SpeedyBee FS225 V2 Frame supports 20x20, 30x30 mounting solutions, indicating flexibility in component placement and the ability to accommodate various sizes of drone components.

DJI compatible units

DJI is a leading brand in drone technology, known for its high-quality products. When a drone frame is said to be compatible with DJI units, it means it can support components or systems designed by DJI. The video mentions that the SpeedyBee FS225 V2 Frame can run DJI compatible units, which is a significant feature for users who may want to integrate advanced flight control systems.

3D printed parts

3D printed parts are components made using a 3D printer, which can be used to customize or enhance a drone's functionality. The video script mentions that some 3D printed parts are needed for DJI compatibility with the SpeedyBee FS225 V2 Frame, and also that a 3D printed part is included for mounting the XC60 camera, demonstrating the frame's adaptability and the importance of customization in drone building.

XC60 camera

The XC60 camera is a specific model of FPV camera used in drones, known for its quality and performance. The video mentions the inclusion of a 3D printed part for mounting the XC60 camera on the SpeedyBee FS225 V2 Frame, highlighting the frame's consideration for accommodating popular camera models and ensuring their safe and effective use.

Antenna mounts

Antenna mounts are used to secure the antennae of a drone, ensuring a stable connection for remote control and video transmission. The video script describes the inclusion of four antenna mounts with the SpeedyBee FS225 V2 Frame, which are adjustable and can be shortened to prevent breakage, showing attention to detail in the design for robust drone operation.

Battery strap

A battery strap is a component used to secure the battery in place on a drone. The video mentions a 'fat battery strap' included with the SpeedyBee FS225 V2 Frame, indicating a focus on secure battery attachment and potentially indicating a higher quality or more durable strap than standard ones.

Highlights

Introduction of the SpeedyBee FS225 V2 Frame, a new FPV freestyle frame from SpeedyBee.

Sponsorship mention of PCBWay for project assembly and services.

The frame supports both 5-inch and 4-inch FPV cameras with a unique flip mechanism.

Top mount battery layout with an option for bottom mount if not using a 20x20 setup.

Interchangeable arms for easy replacement after crashes.

Self-locking nuts included for secure mounting.

The quadcopter weighs 123 grams, a good balance within the typical frame weight range.

Mounting solutions for 20x20, 30x30, and various combinations.

Adjustable mounting slots for different stack positions.

Compatibility with DJI air units, requiring some 3D printed parts.

Inclusion of a 3D printed part to prevent propellers from chopping the XC60.

Four antenna mounts provided, with a recommendation to shorten them for durability.

A high-quality fat battery strap included with the frame.

Mention of the frame's weight possibly being 119 grams without 3D printed parts and anti-slip sticker.

The top plate is 2mm thick, with a preference for a thicker design.

Arms are 5mm thick, meeting the standard for rigidity.

Structural support with fat standoffs to enhance the frame's durability.

A preference for a 3mm bottom or top plate for added strength.

Upcoming build video featuring the SpeedyBee FS225 V2 Frame and its components.

Casual Browsing

First Look: SpeedyBee FS225v2 frame and new antennas

2024-08-27 07:02:00

The BEST QUAD I've Ever Built!!! // SpeedyBee V2 πŸ› οΈπŸŽ

2024-08-27 06:27:00

Speedy Bee 5 inch Freestyle Frame - Overview

2024-08-27 03:43:00

Hype Cycle Version 4 V2

2024-06-20 08:40:01

Midjourney v6 News: SREF v2 Released

2024-05-02 10:55:00